|
|
|
|
|
Bent Aluminum Frames
Wood Servo Tray
Bolt to hub clutch (Non-uniball)
Standard silver clutch drum
Plastic head block
Side arm trailing link anti-rotation
No main shaft thrust bearings
Non ball bearing plastic elev swing arm
Gyro mounts on servo tray
Head button not included
Non ball bearing aileron tray mount
No push/pull collective
No push/pull elevator
Aluminum single boom support
Wire tail drive system
1 radial 1 thrust tail blade bearings
Plastic canopy
Standard plastic fin
Used 30" tail boom - 660 main blades
1987 Plan sheet 1
1987 Plan sheet 2
|
|
|
|
|
|
|
|
|
|
(See Note below) Bent Aluminum Frames
Plastic Servo Tray
Uniball clutch
Standard silver clutch drum
Plastic head block
Side arm trailing link anti-rotation
No main shaft thrust bearings
Non ball bearing plastic elev swing arm
Gyro mounts on servo tray
Head button not included
Non ball bearing aileron tray mount
No push/pull collective
No push/pull elevator
Aluminum single boom support
Wire tail drive system
1 radial 1 thrust tail blade bearings
Plastic canopy
Standard plastic fin
Used 30" tail boom - 660 main blades
A full plan set and instruction manual for the '93-97 model are available in the main X-Cell section under online manuals.
Note: The 1998 X-Cell 60 used stacked Aluminum frames
1998 Plan sheet 1
1998 Plan sheet 2
1998 Plan sheet 3
Plan sheets compliments
|
|
|
|
|
|
|
|
|
|
Stacked Aluminum Frames
Plastic Servo Tray
Uniball clutch
Standard silver clutch drum
Plastic head block
Side arm trailing link anti-rotation
No main shaft thrust bearings
Ball bearing plastic elev swing arm
Rear gyro mount
Head button not included (2)
Non Ball bearing aileron tray mount
Ball bearing push/pull collective
Ball bearing push/pull elevator
Dual graphite boom support
Torque tube drive
1 radial 1 thrust tail blade bearing
Plastic canopy
Standard plastic fin
Used 31.5" tail boom - 690 main blades
ST Plan sheet 1
ST Plan sheet 2
ST Plan sheet 3
(1) Not sure of the date, sometime after SN 001513, and Feb. 18, 1999. Plans will have 1999 date in lower left corner.
(2) Current ST includes head button
|
|
|
|
|
|
|
|
|
|
|
Additional notes:
The bent frame version of the 1001 was also available in a "white frame" version #1001W . This version included White main frames, tail boom, boom supports, strut supports, elevator plate, struts & skids.
When the "white frame" version of the 1001was first released (circa 1990) it was called a #1005. (Not to be confused with the later 1005 X-Cell Gas graphite
|
|
|
|
|
|
